|
CAR AND TRUCK BRAS BY COVERCRAFT
COVERCRAFT CAR BRAS are more
economically priced then the COLGAN CAR BRAS.
COVERCRAFT CAR BRAS: Protective air
intake screens are an integral part of the mask, not separate, and they are
sewn into the outside of the mask so there are no loose pieces of material
inside to abrade the paint surface. Covered aluminum tabs allow adjustment at
the fender wells as vinyl expands and contracts due to temperature. Take a
look at a non-adjustable mask being driven down the road and you'll see why
this is an important feature. Reinforced air foils prevent flapping and lift.
Very few patterns don't require this feature; there is just too much air
whipping around the front of your vehicle as it goes down the road, like
cross-winds and back drafts from passing semi trucks. We use a
micro-perforated finish on our vinyl. It allows the mask to "breathe" and
permits moisture vapor to evaporate when the vehicle is driven in wet weather.
Still, if a mask becomes wet and is going to be left sitting in the sun, we
recommend it be removed to allow the backing to dry properly. Our heavy-gauge
leather grain vinyl has a soft, protective backing. We use white non-woven
fleece so you can easily see when it's time to clean the back-side of the
mask. Seams are overlapped and finished with a strong, durable top stitch.
Edges are covered with soft, non-abrasive felt-rimmed bindings.
FROM THE PHOTOS BELOW DECIDE WHAT TYPE
OF CAR BRA YOU WOULD LIKE TO ORDER. ONCE YOU HAVE DECIDED ON THE BRA TYPE,
THEN GO TO THE APPLICATION GUIDE LINK AND BE SURE YOUR PARTICULAR VEHILCE IS
LISTED FOR THE BRA TYPE YOU HAVE AN INTEREST IN.
|